000			02004cab a2200277Ia 45 0
001			u205609
003			SIRSI
008			110628s2012 ua ss b eng d
040			_aEAL
041			_aeng _bara
090			_aART MJAE V29 No2 7
100	1		_aEl-Sharabasy, Moheb M. A.
240	1	0	_aMisr Journal of Agricultural Engineering, 2012 v.29 (2) _h[electronic resource].
245	1	0	_aManufacture and evalvation of a simplified machine for planting okra seeds _h[electronic resource].
246	1	5	_aتصنيع وتقييم آلة مبسطة لتناسب زراعة بذور الباميا.
300			_ap.633-654.
504			_aIncludes references.
520			_aThe object of this study was to manufacture and evaluate a simplified planterfor planting okra seeds. The okra planter consists of four main parts of three cylindrical ellipsoid hoppers with bored metal strips, furrow openers and covering device. The planter was adjusted to plant okra seeds under the following parameters: three different numbers of holes on the hopper of 3,4 and 5 holes; four different hole diameters of6, 6.5, 7 and 7.5 mm; and three diffrrent planter forward speeds of 0.55, 0.78 and 1.15 km/h. From obtained laboratory and field tests. it could be concluded the followings: The maximum seed discharged from the hoppers of 8.16, 7.82 and 7.42 kg/fed were achieved at 5 holes number on the hopper and planter forward speeds of 0.55, 0.78 and 1.15 km/h. respectively. The maximum mean seed No. in the hill of4.91,4.63 and 4.36 seed/hill were achieved at 4 holes number on the hopper, 7.5 mm hole diameter and planter forward speeds of 0.55, 0.78 and 1.15 km/h. respectively.
546			_aSummary in Arabic.
650		0	_aOkra _xPlanting _xMachinery.
650		0	_aOkra _xSeeds.
700	1		_aAli, Mahmoud M. A.
773	0		_tMisr Journal of Agricultural Engineering. _g2012.v.29(2) _x1687-384X _7nnas _wu192786
856	4	0	_uhttp://nile.enal.sci.eg/EALE/2012/MJAE/2912/2/633.pdf _zFull Text Article
596			_a1
942			_cAR _2lcc
999			_c56348 _d56348