000 cab a22 a 4500
999 _c63124
_d63124
001 u212596
003 ENAL
008 161019s2017 ua ss b eng d
040 _aEAL
_cEAL
041 _aeng
_bara
090 _aART MJAE V34 No2 31
100 1 _aEI-Soaly, T. S.
_919269
240 1 0 _aMisr journal of agricultural engineering, 2017 v.34 (2)
_h[electronic resource].
245 1 0 _aSome physical properties of rice straw briqeuttes /
_h[electronic resource].
246 1 5 _aبعض الخصائص الفزيائية لقوالب قش الارز
300 _ap.1123-1142
504 _aIncludes references.
520 _aThe main objective ofthe present study is to develop the fundamentals of a technology for energetic utilbation ofrice strml,. aimed at solving the problem of harmful storing and burning of rice strmll in Egypt and preventing the smoke clouds caused by this and handling via the right way that is safe for both the environment and agriculture, producing a cheap. easily storable. and environmentally sound biofuelfor rural areas in Egypt. Chopped rice strmll was densifled into briquettes using a laboratory model vertical hydraulic press at different formation pressures of (/5, 32. 49 and 60 MPa), three temperature (room temperature (3S'C). 75 and 100"C). three level ofmoisture content (6.53. 8.90 and /0.26% wb) and different holding time (10.20 and 30 min). The results showed that the highest bulk density. compression ratio, durability and water resistance were 1337 kglmJ • 18.95% and 107 min, respectively. at formation pressure of 60 MPa. temperature of /O(f'c, moisture content of 6.53% and holding time of 30 min. While•. the minimum resiliency obtained was 6.53%. The CO. CO2 and NOx emissions values for rice straw briquettes decreased by 69, 54 and 37 %, respectively, ofthe emissions values CO, CO2 and NOxfor chopped rice straw. The combustion efficiency was 99% and 70% for rice straw briquettes and chopped rice strmll, respectively, and the burning time was about 74 and 15 min for rice straw briquettes and chopped rice straw. respectively.
546 _aSummary in Arabic.
650 0 _aRice straw
_919270
700 1 _aEL-Bessoum, R. R.
_919272
700 1 _aFodah, A. E. M.
_919273
773 0 _g2017.v.34(2)
_tMisr Journal of Agricultural Engineering.
_wu192786
_7nnas
_x1687-384X
856 4 0 _uhttp://nile.enal.sci.eg/EALE/2017/MJAE/3417/2/1123.pdf
_zFull Text Article
942 _cAR
_2lcc